Hello guys,

in some days i start the next and much more bigger project; the biggest project of my pinball machines.

I know that many thinking now at least that i must be absolutely crazy in my head and i can say only: YES!

This pinball will be get a complete new construction; little shorter as normal pinball; but it will play also in the big backbox with a multi-level design. Little like the machine from "Pinball Circus" - but not in the same way. The MM will get some new features; i´m thinking about two or three little TFT displays with more of animations; but in different corners. As i think now the machine will get four levels for playing; with many features from the original WPC machine.

But don´t be nervous; i need no original MM machine for using this parts; to expensive and to difficult to find a machine in a bad condition. All what i need will be produced new as prototype single parts!

I hope you´ll enjoy my next and very long project which will go about many years and be showed here in this thread.......

Much greetings from Germany,

PinGeorge

Best of luck with your new project George!

look forward to the updates

Sounds amazing! Did you finish your Wizard Blocks game? Will you work on both at the same time?

Both games will go at the same time; and for future there will be nothing more. I have not so much place to realize more projects and at end this will be good.....  

pic 1: Much of wood is needed for the new cabinet which will get a complete new look....... without metal legs!

pic 2: First preparations today for the construction......

pic 3: The first cutted wood sheets......

Will be updated asap......

kool....you have a lot of spare time you havent spent yet....

That´s right - long time was no real time for my hobby  

pic 1: Most of the wood sheets are cutted & milled; ready now for completing for the first part of the new pinball.....

pic 2: The first parts i put together with wood glue and long screws.....

pic 1: the basic for the cabinet is ready now......

pic 2: the lower part is now in work - all of wood is cutted & milled and ready for the next steps.....

The complete box will be made in three parts: lower part - middle part (cabinet) - top part (backbox) and all will be engraved with stones; on the backbox will be some towers and windows; at the cabinet will be a engraved logo from the original MM decals. More coming in the next days.....

Now it´s time to finish the lower part for the cabinet......

pic 1: There is a frame which is glued at the top of the sidewalls which allows the local place for the cabinet.

pic 2: The first walls glued and mounted together.

pic 3: The preparation and mounting of the inside walls....

pic 4: The inside walls ready for fixing into the outside walls; they will be glued into the grooves which i milled for better connection....

pic 5: The lower part get his last outside walls and now it´s time to get a first impression how the lower part is looking.......

more coming tomorrow......

Yesterday i completed the lower part for the cabinet.

pic 1: i used 12mm strong plywood for the top that allows me to connect the lower part with the cabinet. In the middle it is open that i can put the sound system into the bottom of the cabinet.

pic 2: the pillar get small pieces of wood and then the round arch get pieces of thin sheets of plywood

pic 3: the pillar get at the bottom a small piece of wood; round milled at the edge; for the finish of the pillars.

pic 4: the lower part at his place; ready for the next steps putting the cabinet onto it.......

pic 1: some wood strips were glued into the cabinet and then was the time for.....

pic 2: the first test how the cabinet takes his place on the lower part..... and it works fine  

Tomorrow it´s time for the stone engraving; the logo will be made in 3D milling and then fixed into the cabinets wall.....

more coming soon!

Jebus George your keeping busy.

When are you running the moat through the living room?