Anyone in the London area have a Wms sys 6 driver board they could lend me to test in my Firepower project for a turn on?  

Or is anyone anywhere selling a working one?

Steph is sending me an test eprom, and everything in pinrepair.com tells me my CPU board is good, but I would just like to make certain before really delving into my driver board?

Thanks,

Aaron

check all the transistors for shorts,replace all 3 of the PIA 6821,http://www.pinrepair.com/sys37/index1.htm#interconnect,the interconect is a good thing to replace as well

I've replaced the interconnect, I'm going to try testing all the PIA's first before just ramdomly replacing anything else, as this project was for half experience.  I'm sort of leaning towards a PIA being the issue now, as I did replaced both trans and the 7408 behind the two coils with issues, but who knows.

I was just hoping to get a loaner to confirm for sure if it was the driver board.

I have one working however the interconnect is original,so you have to play with how its seated,if you pay the shipping both ways to/from Hamilton ,you can try it out