Here is my game room. TZ just purchased. Early release (Green lock, Posts between bumpers).Working on the Robbie mod. T2 had for over a year fully shopped and lots of work put into it.
MAME Cabinet built 2 years ago from an old XYBOTS cabinet. Custom control 4 player Panel. Player one had 8 point rotation joystick(for IKARI warriors) and 2nd joystick with button for Battle zone. 2nd player 8 point has 2nd joystick with button for Battle zone. Track ball Duel spinners (one with wheel) 4 way joystick in middle for Pac man and Donkey Kong. Flight stick for Afterburner and Tron. Has 2 light guns for gun games (Area 51 and terminator) Player Coin and start buttons (Coin slots also work and give you credits). Mouse and escape buttons. Sides of the control panel has plunger and flipper buttons Adjustable volume on front (green light).
Pool table
Foosball in corner Poker table with bumper pool (under all the junk)
Keep groovin' to 80's pinball machines! Complete MAACA-Wacko!
Posts
3,344
Gender
Male
Posts Per Day
2.17
Time Online
800 days 4 hours 48 minutes
Location
Waterdown, ON
Age
46
Very Kewl, the Terminator model just makes it for sure.
Also, thank you - that does it, you guys have convinced me. Instead of fretting and putting off my basement reno and keeping all my pins in storage because i hate drywalling, I am going to decorate with Corning pink and just finish with a nice vapour barrier. All the better pinball collectors seem to be doing it.
This is not really part of my game room, but no game room should be missing. My KEGINATOR! The right side is for beer and the left side(with lock) is home made rootbeer for the kids.
Nice looking setup, really like the Terminator statue. surprised you don't have a T3 machine down there with your slight obsession it would seem with the Terminator series
Own Magic, Star Gazer, Batman Forever, STTNG, Mystery Castle (project)
Gone Fairy, Secret Service, Meteor x3, Title Fight, Eight Ball Deluxe, Bone Busters Inc., Seawitch, Starship Troopers, Strange Science, Arena, Hook, Pin*Bot x2, Time Warp, Motordome, Robocop, Black hole, Jurassic Park , Wipe-Out, Pinball Pro: Challenger I, Swords of Fury, Stargate, Party Zone
Looking for 1966 Bally Capersville, 1967 Bally The Wiggler, 1981 Stern Viper, 1986 Pinstar Gamatron, 1986 Williams Grand Lizard, 1991 Williams Bride of Pinbot, and a few others. Cash or some trades available. Could also repair a machine of yours +/-$ if needed, in exchange for one machine on my want list, non-working/unshopped welcome!
Own Magic, Star Gazer, Batman Forever, STTNG, Mystery Castle (project)
Gone Fairy, Secret Service, Meteor x3, Title Fight, Eight Ball Deluxe, Bone Busters Inc., Seawitch, Starship Troopers, Strange Science, Arena, Hook, Pin*Bot x2, Time Warp, Motordome, Robocop, Black hole, Jurassic Park , Wipe-Out, Pinball Pro: Challenger I, Swords of Fury, Stargate, Party Zone
It'd be a lot cooler if you did........ MAACA-Colonel
Posts
254
Gender
Male
Posts Per Day
0.81
Time Online
50 days 23 hours 38 minutes
Location
New Brunswick
Age
44
Very cool games room! Love your Terminator stuff too! And of course the Keginator!! How do you like the Margaritaville Blender? I've been thinking about getting one someday.
Pete
Currently own: SPIDER-MAN!!! Eight Ball KISS Gorgar Xenon Fireball II Fathom EBD Fireball Classic Taxi *Coming Soon* Mystery Pin......oooooooooooh
Very cool games room! Love your Terminator stuff too! And of course the Keginator!! How do you like the Margaritaville Blender? I've been thinking about getting one someday.
Pete
It has alot of power so it is great for the margaritas. It's actually is a 2 part system. It shaves the ice into the blender so you don't have the contents sieize up when you blend. I like to make my own ice coffee and homemade Iced Cappuccino.
TZ- early production green lock edition Cliffy protectors Blue clock housing Rottendog clock board Gumballs & Gumball light kit Lighted Shooter rod Complete LED kit (Backbox, Insert and flashers) Robbie mod Pyramid Mod Setup for tokens with 9.4ch T2 Complete LED kit Lighted HK Setup for tokens with profanity rom LOTR Lighted eye mod Complete LED kit Custom shooter rod Cliffy protectors Extra figures Setup for tokens Taxi Setup for tokens RFM Complete LED kit Cliffy Protector Nucore 23" monitor Setup for tokens IM Shaker motor Knocker Gold kit Custom shooter rod Custom IM figure with LED Complete LED kit Cointaker back box kit Setup for tokens Red lighted ground kit T3 LEDs in Back box Setup for tokens FG Knocker Complete LED kit Setup for tokens Cliffy protectors TSPP Knocker Complete LED kit Setup for tokens Cliffy Protectors SM Shaker Knocker Complete LED kit Extra figures added Cointaker LED back box kit Setup for tokens JD
Complete LED kit Deadworld mod New speakers(3.5, 5 1/4 and sub) Cliffy protector Hyperball
Wow, Looks great! That is one Huge amount of LED's!! Did you LED the Hyper-Ball??
Dave
Here are games I would like to acquire this year, or sometime...
24 Iron Man Attack From Mars Prefer Pounded playfield! Monster Bash Prefer Pounded Playfield! Elvis Sopranos Batman Forever Spider-Man Stern Prefer Pounded Playfield!
Have these available for trade or possible sale: Corvette South Park Theatre of Magic Twilight Zone RFM/SW:EP1 Nucore Combo AFM
finally someone else who uses tokens, i'm not the only one anymore
What type do you use? i use .984 chuck-e-cheese ones, and i even have an old chuck-e-cheese token dispenser to give them out
awesome gameroom by the way.
Eric
Waterloo, Ontario Collection : *UPDATED*
PINS :
Stern Roller Coaster Tycoon, Williams Earthshaker, Williams Cyclone Williams White Water, Data East Back To The Future, Stern Ripley's Believe It Or Not
VIDS :
Cruis'n USA x 2 (linked), California Speed x 2 (linked) Mame machine in converted Smash TV Cabinet 4 Slot Neo Geo
finally someone else who uses tokens, i'm not the only one anymore
I was actually wondering about that-did you guys convert them to use tokens just to complete the arcade experience, or are there other reasons you don't just have games set on free play?
Very nice collection, you have put a lot of effort. I know most people did not notice but I congratulate you on the miror ball attached to the ceiling...........brings back memories
to answer your question, the reason i went the token route is 2 fold, the first is that i wanted the arcade experience, and i found people really love just putting the tokens in, and the rush of having to run and get another one before the continue countdown is over, and it's just something that adds to the realism of it all.
2nd reason is a lot of people who don't know much about pinball end up just hammering the start button, and getting 4 games on the go, and only playing like 3 balls and walking away with 4 games running, then i have to go drain the ball, and re-start the machine, by having tokens, they usually only put in one, and that eliminates the problem.
Eric
Waterloo, Ontario Collection : *UPDATED*
PINS :
Stern Roller Coaster Tycoon, Williams Earthshaker, Williams Cyclone Williams White Water, Data East Back To The Future, Stern Ripley's Believe It Or Not
VIDS :
Cruis'n USA x 2 (linked), California Speed x 2 (linked) Mame machine in converted Smash TV Cabinet 4 Slot Neo Geo
to answer your question, the reason i went the token route is 2 fold, the first is that i wanted the arcade experience, and i found people really love just putting the tokens in, and the rush of having to run and get another one before the continue countdown is over, and it's just something that adds to the realism of it all.
2nd reason is a lot of people who don't know much about pinball end up just hammering the start button, and getting 4 games on the go, and only playing like 3 balls and walking away with 4 games running, then i have to go drain the ball, and re-start the machine, by having tokens, they usually only put in one, and that eliminates the problem.
Eric
How is it done? Do we have to convert the coin mech or will the normal 25 cents one will also take tokens? Lastly, where do we pruchase tokens?
i replaced all my quarter mechs with .984 token mechs found on ebay, and all the chuck-e-cheese tokens i bought off ebay as well.
if you don't care what the tokens look like, you're better off just buying the japanese slot machine tokens, you can get them super cheap, and they work in .984 token mechs as well,
Waterloo, Ontario Collection : *UPDATED*
PINS :
Stern Roller Coaster Tycoon, Williams Earthshaker, Williams Cyclone Williams White Water, Data East Back To The Future, Stern Ripley's Believe It Or Not
VIDS :
Cruis'n USA x 2 (linked), California Speed x 2 (linked) Mame machine in converted Smash TV Cabinet 4 Slot Neo Geo
i replaced all my quarter mechs with .984 token mechs found on ebay, and all the chuck-e-cheese tokens i bought off ebay as well.
if you don't care what the tokens look like, you're better off just buying the japanese slot machine tokens, you can get them super cheap, and they work in .984 token mechs as well,
tks, sorry Cobra99 for the small hijack of your thread. Again very nice game room.
I was actually wondering about that-did you guys convert them to use tokens just to complete the arcade experience, or are there other reasons you don't just have games set on free play?
I did it for the complete package. The machine sounds when you drop in a coin. the sound of the coin going thru the mech etc. Also cuts down people starting too many games etc
Very nice collection, you have put a lot of effort. I know most people did not notice but I congratulate you on the miror ball attached to the ceiling...........brings back memories
Keep on playing brother
I even have spot lights to shine on it when I want to go retro.
hahah i bought the bellagio tokens too, and i use them in my slot machine, they look way nicer then the crappy ones that came with it, and they were stupidly cheap on ebay
Waterloo, Ontario Collection : *UPDATED*
PINS :
Stern Roller Coaster Tycoon, Williams Earthshaker, Williams Cyclone Williams White Water, Data East Back To The Future, Stern Ripley's Believe It Or Not
VIDS :
Cruis'n USA x 2 (linked), California Speed x 2 (linked) Mame machine in converted Smash TV Cabinet 4 Slot Neo Geo
Own Magic, Star Gazer, Batman Forever, STTNG, Mystery Castle (project)
Gone Fairy, Secret Service, Meteor x3, Title Fight, Eight Ball Deluxe, Bone Busters Inc., Seawitch, Starship Troopers, Strange Science, Arena, Hook, Pin*Bot x2, Time Warp, Motordome, Robocop, Black hole, Jurassic Park , Wipe-Out, Pinball Pro: Challenger I, Swords of Fury, Stargate, Party Zone
Cobra99
Male
websherpa
Logged
, Wipe-Out, Pinball Pro: Challenger I, Swords of Fury, Stargate, Party Zone
You really HAVE been on a spending spree since your last update, haven't you! 
very impressive.. love it!
MAACA ARCHIVES - JOIN THE NEW FORUM AT HTTP://WWW.MAACA.ORG › General Boards › Game Rooms - Salles de Jeux › Cobra99's Game Room(Updated August 23)
