Hi guys,I have been workig on an old Stern Dracula,pretty much a basket case,for a few weeks now.I had the mpu and sound board redone by Mindstorm(great job,thanks!),I swapped a totally trashed playfield for a better,but still rough replacement.This is kind of a learning project,lots of butchered wiring ,things not working etc.I have gotten to the point where it plays,but I still have no lights,except for a few on the bottom of the player display board,on the head.many of the wires have been soldered directly onto the rectifier board and some are broken off.The top left connector is 8 pins(from left)#1 red wire,2,3,4(empty),5 are all unused,6 is a blue wire/whit stripe,7 is green,8 is yellow.I soldered these back on while I wait for my connectors to come in,but it keeps blowing the 10 amp F1 fuse ,the 20 amp fuse for the GI lights is ok.Also I have tried another good lamp driver in this machine,but nothing.Is this a problem on the rectifier board,I dont really know if these wires were in the right spot ,but thats where they were originally when I got it. |