Clay’s Williams Multigame owners! If you have a MW kit could you confirm if you have these resistors on your widget board? I bought a used MW kit and have my game running 100% finally. Thanks Chuk Comparing the boards I noticed that my original kit might/is missing resistors on the widget board ( the row closest to the header pins) that I bought a few years ago. From Day One, I have always had a problem with defender & stargate the controls would not work but in the test menu all controls work 100%. Robotron had a few issues with player 2 screen flipping 50% of the time & player 1 & 2 start buttons being backwards. I also found a solder bridge on the pcb between the pins on the cpu expansion chip iMA45-32/32 (arrow in the picture) I used a small pin to break the solder. It solved the player 2 robotron screen from flipping but never solved the defender/stargate issue. Clay has never got back to me I have emailed with no response (guess he is just has no time?) Any help would be appreciated. My Boards   A picture of the board from clays site:  |