I got this really nice Whirlwind but theres only two little problem that annoye me. The top drop target is not working, the points get added the sound is working and all but the drop target dosen't comme back up when you hit it. Also if you hit a lot on the flipper you'll get free skywaytolls or other special points for no reason.

If you got a clue what to do, hit me back!!!

Quoted from shootmeink

I got this really nice Whirlwind but theres only two little problem that annoye me. The top drop target is not working, the points get added the sound is working and all but the drop target dosen't comme back up when you hit it. Also if you hit a lot on the flipper you'll get free skywaytolls or other special points for no reason.

If you got a clue what to do, hit me back!!!

2 problems here.

1. Drop target:  Coil problem.  Confirm this by going into coil test and try to get the target to reset (Solenoid 08A).  If it does not reset, try the flasher test (Solenoid 08C).  IF the flasher does not work then you most likely have a problem on the board with a bad transistor.  If the flasher works then check the wiring to the target reset coil.

2. Some of your switches are set too sensitive.  Go into switch test mode and shake the machine, use the flippers, etc. and see which switches trigger.  Then adjust them to be less sensitive by slightly bending the switch actuators.

Mike