Does anyone have a decent set of legs for a GOTTLIEB system 1 game in the LONDON - TORONTO area?


I need the set that are 27 inches long.

I could use a set, too, in the Ottawa area... - PBR sells them for $15 a leg - but I'm sure shipping would be pricey.

(Obviously poolman gets first crack at anything available - but if there's a second set...)

Quoted from Tuborg

I could use a set, too, in the Ottawa area... - PBR sells them for $15 a leg - but I'm sure shipping would be pricey.

(Obviously poolman gets first crack at anything available - but if there's a second set...)

For that, I recommend Allentown, if you can wait. That is the best bet.

Quoted from Sparky

For that, I recommend Allentown, if you can wait. That is the best bet.

Yeah, we can wait.   Right now 3 of the 4 legs are 27" - only 2 of the 4 are chrome      And 2 of the 4 legs the threads for the leg levellors are stripped so much they cannot be re-threaded for the same size.   So the machine's to wobbly & Vengence cannot play Sinbad - but then again Sinbad rules too repititive for Adam

We were hoping Rochester would have parts for sale, but it was disappointing.

I bulk ordered in the past enough legs to replace virtually all of my machines legs and had them shipped to a U.S. address through one of the members here. Overall the cost of doing this was in line with what you would pay at the shows and the shipping wasn't too costly even though it was a heavy load because it was a U.S. address.

Quoted from Tuborg

Yeah, we can wait.   Right now 3 of the 4 legs are 27" - only 2 of the 4 are chrome      And 2 of the 4 legs the threads for the leg levellors are stripped so much they cannot be re-threaded for the same size.   So the machine's to wobbly & Vengence cannot play Sinbad - but then again Sinbad rules too repititive for Adam

We were hoping Rochester would have parts for sale, but it was disappointing.

Then go temporarily with Bally/Williams legs... The machine will sit a bit lower, but it will be playable.

Quoted from Sparky

Then go temporarily with Bally/Williams legs... The machine will sit a bit lower, but it will be playable.

Are those legs readily available north of the border?   I don't have a warehouse of old parts yet.

(Poolman sorry for the hi-jack -

---

Poolman still needs GOTTLIEB SYSTEM 1 LEGS - 27"  - in the TORONTO AREA)

---

This might be common knowledge, but Starburst orders regularly from PBR.  By the time you factor in exchange and shipping (and money order hassles with Steve), its about the same.

Oh ya...

*Bump*

Quoted from Tuborg

So the machine's to wobbly & Vengence cannot play Sinbad - but then again Sinbad rules too repititive for Adam

What the??.....

How the hell did I get brought into this, !

Quoted from Tuborg

Are those legs readily available north of the border?   I don't have a warehouse of old parts yet.

---

Poolman still needs GOTTLIEB SYSTEM 1 LEGS - 27"  - in the TORONTO AREA)

---

Yes. As stated, Starburst and many members with spare legs in their secret stash. I have a few.

Hmm... I can get junked sys.1 pins for dead cheap. I guess I can part out a couple and sell the legs... Let me look into it tonight.

I have a set of very nice legs that are taller than the standard Williams legs. They are the older style leg. If this is what you are looking for I have a set I can sell you.

The  GOTTLIEB legs are only 27 inches tall,old Williams legs are 28.5 inches.
It is noticable the hight differance beside the other games.